1994 OEM Honda RS125 intake manifold with 5-degree boot, for use on Stock Spec Honda CR125cc Moto 2-stroke engines - SwedeTech Racing Engines
 

Honda RS125 Intake Manifold w/ 5° Boot...

This pre-1995 Honda RS125 intake manifold (P/N 16220-NF4-900) has a 5° boot and can be mounted to 1999 Honda CR125 Moto engines, without having to remove the kick starter boss.  Note:  This part had erroneously been listed as (P/N 16210-NX4-000).

Purchase Online

The 5-degree angle design makes it much easier to mount a seat strut on a 125cc shifter kart.
Larger Image

This pre-1995 Honda RS125 intake manifold (P/N 16210-NX4-000) has a 5° boot and can be mounted to 1999 Honda CR125 Moto engines without having to remove the kick starter boss.
Larger Image

The 5-degree angle design makes it much easier to mount the seat strut, on the engine-side of a 125cc shifter kart, versus using the 1999 CR125 OEM 30-degree intake.

Purchase Online

The rubber lobes (intake stuffers) on this 1994 Honda RS125 manifold will need to be notched, in order for this intake manifold to fit on late model Honda CR125 2-stroke motors.

Note:  Be sure to check the rules, for the race venue in which you plan to participate...  A Honda RS125 intake manifold is not allowed in some "Stock Moto 125cc" shifter kart classes.

 

Home Page | ICC Engines | Moto Engines | TaG Engines | HPV Engines
Parts & Accessories | Tech Tips | Map & Directions

SwedeTech Racing Engines
11583 Walmort Road
Wilton, CA 95693

(25 to 30-minutes South of Sacramento and
20 to 30-minutes North of Lodi / Stockton)

916.687.3980 phone  •  916.687.4739 fax

eMail SwedeTech