If you are using the Road Race set up, place the spacer washer included in our kit on the countershaft before the sprocket. To install the E Clip, we use a wide blade screw driver to push the clip on. To Remove, we use a wide blade screw driver and push off. Or you can use a screwdriver between the clip and the retainer and twist the screwdriver to remove the clip. This is the hardest part and once you figure it out, it is EZ.

This entry was posted on Wednesday, August 10th, 2011 at 11:01 am and is filed under Technical Help. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.