Archive for the ‘General’ Category

Ken Schilling SuperNats 14 (2010) Race Report

Thursday, December 23rd, 2010

— Submitted by Ken Schilling, S4 Driver —
“David vs Goliath”, a trail of tears?

Hello family, friends, business associates and fellow kart racers.

All I can say is, WOW!!!

I say “David vs Goliath” tongue-in-cheek because I showed up at the SuperNats in my Honda Odyssey minivan full to the ceiling with karting ?stuff? towing my teeny-tiny trailer into the pits where there are huge tractor trailer rigs with multi-kart teams, tuners, mechanics, driver coaches, data collection evaluators, hospitality areas with tables, food & drinks, etc… One of the many things I enjoy about karting is that with the rules for the Stock Honda engine class that I race in is that it mostly takes away the “I spend more money than you” factor and boils it down to driver and chassis tuning talent (and some luck sure doesn’t hurt…). The money factor does factor in where some of the drivers can afford to hire a full time mechanic and/or an ?arrive & drive? program compared to myself where I pretty much do everything? except alignments (Doug Sorensen owner of Extreme Karting does those for me. I’m also on a four year old chassis, where many drivers consider a two year old chassis ancient!!!

The SuperNats is a once a year event bringing together the finest karters from around the world to race each other to see who’s the best in their class from all different racing organizations and sanctioning bodies. As a karter, you hear about these drivers by word of mouth and read about them in the various karting magazines and online, but now you get to put a face to the name (not just a helmet paint job) and race head to head to see who is truly the best and hopefully make some new friends in the process. While yes it’s extremely competitive, there is a great sense of camaraderie and love for the sport shared by all who participate.

As a karter for the last eight years, this being my third SuperNats as a driver and previous to that two years as a SuperNats corner worker, this was almost a solid week of karting nirvana. Almost 500 drivers from 25 countries, professional drivers from different car racing series, etc… Even in these challenging economic times this year set an entry record breaking last year?s previous record by almost 70 drivers!!!

Last year SKUSA was extremely fortunate to have three current Formula 1 drivers race at the SuperNats including seven time Formula 1 champion Michael Schumacher. This year the Formula 1 schedule didn?t end until after the SuperNats so unfortunately no Formula 1 drivers were in attendance. Keep in mind that the majority of professional auto racers get their start in karts and the majority of Formula 1 drivers race karts in the off season to stay sharp.

This year, as well as the last two years, the SuperNats was held on a temporary track in the back parking lot of the Rio Hotel & Suites in Las Vegas, NV the week before Thanksgiving. This location is fantastic affording plenty of room for the track and pits and is just a short walk from the hotel and usually picture perfect weather with sunny mid 60 to low 70 deg temps (more on this later?). The SKUSA gang arrives the previous week (!!!) to start setting up the track, pits, timing & scoring, etc… This is a culmination of almost 12 months of work to put this event together; in fact they’ve already begun preparations for next year.

First, let me explain the class that I race in, S4. S4 is a Stock Honda shifter kart class for 30+ yr old drivers and 405+ lbs minimum overall weight that uses a Honda CR125 two stroke engine off of a motocross motorcycle that has very tight rules where you can do very little to the engine. About the only things that you can do are; reeds & carburetors (you can change the jetting for varying atmospheric conditions), adjust the timing a little bit, exhaust pipes &
silencers. Other than that it’s “no touchy!!!? This helps to keep costs down by increasing reliability as well as eliminating any engine modifications keeping the class a “drivers” class and not how deep your pockets are. The engine puts out ~35-37 hp, revs to ~12,600+ rpm with about a 3,000 usable rpm range to keep it “on the pipe”, has a six speed sequential manual gearbox and you can change the overall gearing by changing the engine output shaft sprocket and/or rear axle sprocket. The chassis has four wheel disc brakes; one on each front wheel and one on the rear axle (there is no differential). The only time we use the clutch is for getting the kart moving from a standing start or to quickly grab in case of a spin so the engine doesn’t stall. It?s also sometimes used in very slow 1st gear corners especially at the beginning of a race where the karts are very close together and slower than the usual race pace. We shift with a lever just to the right of the steering wheel, pull to upshift and push to downshift. We don’t use the clutch for shifting; just a little lift off the throttle will do the trick. The kart is capable of 0 to 60 mph in ~3.5 seconds, over 100 mph top speed which I’ve done personally (I’ve been told ~115 mph in a draft on a long enough straight), can pull ~3 G’s in the corners and stop on a dime and give you nine cents change!!! Many compare them to a Formula 1 car just on a smaller scale. All of this is happening with your butt ~1″ off the ground so you have an extremely high sensation of speed. With the high G loads, most drivers wear rib vests to help prevent a fairly common karting injury, broken ribs and/or rib cartilage injury. Rib injuries can be sustained without even being in a crash and just during normal racing conditions (side G loads & bumps). I wear a carbon fiber reinforced rib vest in conjunction with a specially designed carbon fiber seat which really locks me in place. Oh, and by the way, there are no seat belts. In fact, you don’t want them because in a worst case scenario of a kart flip you want to be ejected from the kart, not have it land on top of you.

Second, let me explain the chassis. Kart chassis are completely different than cars in that they have no active suspension such as springs, shocks, etc… The only suspension to speak of is the chassis itself, tires and the driver’s butt (hee-hee). The chassis is made up of tubular steel that is designed to flex and twist. While they may look extremely simple, there are many adjustments that can be made to suit different track conditions and driver preferences; front & rear track width and ride height, front end castor/camber/toe, different axle stiffness’s, different front & rear wheel hub lengths, aluminum vs magnesium wheels, install/remove seat struts, different seats, seat materials & stiffness (fiberglass vs carbon fiber), install/remove front/rear torsion bars, change seat position, tire pressures, etc…
thousands of different combinations to suit the track and weather conditions, driving style, etc… OK, so you get the idea that it’s not as simple as it looks!!!

Third, let me explain the tires and how we need to manage them. For the SuperNats we are issued two new sets of race tires that we have to manage for qualifying, three heat races and the main. The tires are marked & numbered for each individual driver. You can use as many new or used tires as you wish during the practice sessions.

Fourth, let me explain the fuel/oil. SKUSA has a “fuel farm” which is just before you enter the grid area to go onto the track. There are two reasons for this. First, for fire marshal safety regulations that limit any extra fuel in the pit area other than what’s in the kart fuel tank. Second, it helps control the fuel/oil to minimize any chances of “hanky panky” with fuel additives. You must bring your fuel voucher card to the fuel farm to retrieve your fuel jug, fill your kart then return your fuel jug to get your voucher back.

Fifth & last, let me explain the track. While kart races are usually held on purpose built kart tracks, the SuperNats is held on a temporary track in the middle of a parking lot. This eliminates the possibility of anyone renting the track prior to the event for practice and having an unfair advantage. It also stresses the tuning & driving capabilities of the driver (and mechanic if the driver has one) starting out on a slippery track and adjusting to the track changes as rubber is laid down and the grip level increases (sometimes very dramatically) as well as changing track conditions going from day to night. This slipperiness really stresses throttle control and putting the kart on the knife edge of traction as much as possible. In the videos you’ll notice what might look like light throttle application but I’m right on the edge of wheel spin.

SKUSA, the sanctioning body of the SuperNats and the nationally growing ProKart Challenge (PKC) regional race series in which I’ve raced the last number of years, runs the SuperNats schedule with morning and afternoon groups (I was in the afternoon group). With this schedule it was great being able to take my time eating breakfast and have plenty of time to do any work needed on the kart or just walk around the pits talking with fellow drivers and generally just taking in the experience before our first track session of the day. In the past, the schedule was just having all of the classes run in order throughout the day which made for long waits, especially if there was any on track incident(s).

In the weeks prior to the event, in my spare time, I took many hours prepping the kart by tearing it down to the bare frame, rebuilding it, replacing fasteners, re-routing hoses & wires and also rebuilding the top end of the engine. Karts look really simple but trust me, they can take a lot of time to prepare!!! I think I should buy stock in ?zip ties? as I go through them constantly?

Tuesday (arrival & check in):
The big teams with their huge tractor trailer rigs began moving in the Sunday prior to the race with smaller teams the next day or so. I’m used to arriving at a race and seeing about 75-100 drivers pitted in everything from karts in the bed of small pickup trucks to large enclosed trailers behind 30′+ diesel pusher motor homes. When I show up at the SuperNats I’m amazed looking at the paddock with million dollar big rigs, a $2.5M Bugatti Veyron(!!!), huge hospitality tents, multiple sponsor and vendor tents, etc… it’s incredible!!! Even though with this being my third time as a driver and fifth overall at the SuperNats, I was still awestruck when I arrived. After a four hour drive from SoCal I arrived Tuesday afternoon, made my way through the pits and dropped off my trailer and other “stuff” at the Extreme Karting “compound” (hee-hee). Extreme Karting owned & operated by Doug Sorensen, is my local kart shop of choice and distributor of the GP chassis that I use. We comprise a team of three drivers (Peter Abba/S1, Matias Podboj/S5 & myself/S4) and we take up two 10 x 40 pit spots. My little trailer is extremely easy to get around and I was able to store it in my pit area for easy access.

Van & trailer:

My humble pit spot & trailer

After setting up my pit I made my way to the registration desk where Tom & Patti Kutscher, the owners of SKUSA, are greeting everyone. Tom & Patti have me help behind the scenes by allowing me to be SKUSA’s “Data Administrator” which is a fancy title for someone who types a lot… In my spare time I process all of the SKUSA memberships, SuperNats/Pro Tour/PKC/NKC race entries, championship points spreadsheets, etc… I am extremely fortunate & grateful for this because if I couldn’t help, I couldn’t afford to race. I check in for the race, get my race tires & fuel from the tire & fuel farms respectively.

I also check in SwedeTech who is my engine builder. Reine Persson, the owner, asks me to bring him my engine. SwedeTech brought their own trailer from Northern California and three(!) people to support all of their customers. I removed my engine from the kart and walked it 100′ down the aisle to their trailer. While I watched and peppered them with ignorant questions, they installed their brand new fuel delivery system, new EZ-Clip quick change countershaft gear and completely went over the engine making sure that it’s ready to go!!! Throughout the course of the event they are continually offering tuning advice, parts availability and “hands on” assistance. GREAT SERVICE!!!

Wednesday (practice):
The last two years there were 40 S4 drivers but this year there were 68!!! (including 15 drivers from Mexico!!!) Due to this large number of drivers there were two S4 groups (P1 & P2) with two subgroups in each (A, B, C & D), 34 each for practice, as 40 is normally the max allowed on the track at one time (more on this later?). SKUSA randomly split the 68 drivers into two groups and I happened to end up in P1 (there is no difference between P1 & P2 at this time / more on this later?). Each group had four practice sessions on both Wednesday & Thursday. Shortly before the race SKUSA posted the track map online and it looked identical to last year’s track?!… Hmmm, last year they did the same thing but the track turned out to be completely different. I wonder if that?s going to be the case this year too?
Turned out that the track was almost identical to last year?s so my showing up with last year?s gearing was a good thing to start with.

Track map

My first session on track was just to get used to the track and see if my gearing was close. I placed myself at the very back of the grid for all of the practice sessions and a number of the other “fast guys” did the same (there were two women in our class). As a testament to the MG tires, I’m on last years SuperNats main tires (1 yr old) for the first three practice sessions on Wednesday. Last year there were a lot of on track incidents, both single kart and karts getting together, during the practice sessions so my strategy was to just lay back, find open track and get up to speed without “racing” anyone. In the first session my initial impressions were that the tires were pretty slippery (being in storage for one year made them kinda hard?) and my gearing was really close but I would know more as the sessions went by especially as the track was still a bit slippery and would grip up as rubber got laid down. The second session I was faster, the tires having ?come in? and got to know the nuances of the track, braking & shifting points, etc…

Wed P2

Wed P3
The third session I was quicker yet (4th in my group / 9th overall).
Keep in mind that I was still on last year?s SuperNats main tires.

Wed P4
As strange as it may sound, you have to compensate the grip level of the chassis for new tires as you can end up having too much grip
(?overstuck?) which actually slows you down. During all of this I made a number of chassis adjustments and felt confident that I was going in the right direction. Now the fourth session was very important as it would dictate the new P1 & P2 groups for the rest of the event with P1 being the faster of the two. For the fourth session I used a new set of practice tires. I made a few adjustments and was 4th quick in my group and 10th overall which solidified myself in the P1 group for the rest of the event. This was very encouraging as last year I was 5th quick out of 40 drivers at the end of Wed practice and gave me some additional confidence going into our second day of practice.

That evening I went out to dinner with Doug Sorensen, discussed the day’s results and strategized for Thursday.

Thursday (practice):
Thursday’s practice sessions went smoothly as the only major thing I changed was my gearing and so far I hadn’t touched a barrier or another kart. I was solidly in the top 15 (12th, 10th & 13th overall respectively) through the first three practice sessions using the tires from the 3rd Wed practice session.

Thurs P1

Thurs P2

Thurs P3

Thurs P4
The fourth practice session was very important (similar to Wednesday?s 4th practice session) as the results would set the P1 & P2 groups for qualifying with P1 being the faster group. This is very important as you want to be in a group that has drivers that are ~ the same speed as you as it will be less of an issue in qualifying being held up by a slower driver. I used Thursday?s 3rd session?s tires and was greeted at the scales by the race announcer Rob Howden who excitedly told me that I was 3rd quick overall!!! WOW!!! AWESOME!!! I was more than a little surprised but very pleased that I was so quick. Hmmm? I was a few tenths quicker on both Wed & Thurs on ?scrub? tires vs new tires? Hmmmm?. (more on this later?). Rob knows that I’m part of the SKUSA staff and that I had a disappointing main race last year where I started 7th (2009 SuperNats 4th row on your left, white driving suit with yellow & green helmet), got spun around on the first lap/first corner but worked my way back to 14th (Spun Photo). I was very excited at the results and looked forward to Friday’s qualifying!!!

That evening I again went out to dinner with Doug Sorensen, discussed the day’s results and strategized for Friday qualifying.

Friday Qualifying (Group P1 / a trail of tears?) / unfortunately I have no Friday videos due to technical difficulties?
Unlike racing with PKC where you qualify and you can move up for each of the two heats (you start heat 2 where you finished in heat 1 and you start the main where you finished in heat 2), at the SuperNats you start each of the three heats where you qualify regardless of your heat results. This makes qualifying hugely critical!!!

The driver is allowed up to two mechanics on the grid for qualifying, heat races and the main. The mechanic(s) can also stand along the fence while their driver is on track to give them hand signals to show the gap to the kart(s) behind. This is very helpful as it keeps you from having to look behind you and helps you decide on your strategy of either being able to attack the driver in front of you or having to defend from the driver(s) behind (or both!!!). Sometimes as a driver you can hear the engine of the kart behind you and/or take a peek behind you as you go around a tight turn. During a race I normally don’t look behind me very often because I don’t want to let the driver behind me think that I’m rattled by them being there. During practice I tend to look around me more frequently trying to find clear track space.

To show you how much tougher/deeper S4 has become in the last few years: in 2008 the top 19 drivers were within 1 second of each other, in 2009 there were 29, this year there were 34!!! Also, on basically an identical track as 2009 the pole time was ~1-1/2 sec faster!!! Wow, fully half of the whole 68 kart field, within 1 second on a 42 sec lap!!! In 2008, my first as a driver, I qualified 18th out of 40 and in 2009 I qualified 12th out of 40. So with my results so far I was hoping that I could qualify in the top ten.

Remember how I was a few tenths quicker, which could end up being more than a handful of grid spots, on scrubbed tires vs new?… Well, after much discussion, debate, etc?with Doug, I decided to ?roll the dice? and qualify on scrubs. So, I used the Friday warm-up to scrub my qualifying tires. This was a huge gamble as most everyone uses one set of their two tire set allotment for Q, H1, H2 & H3 then uses their third set for the main. I had plans on using this tire management strategy but just add the qualifying on scrubs. I made a few chassis adjustments but unlike the practice sessions of parking myself at the back of the grid? I went right to the front and was ~6th in line to go on track. When I showed up to the pre-grid I quickly eyed everyone else?s kart and found that I was the only one on scrubs? Either I was going to be a genius or a goat!!! So, after sitting on the grid warming up the engine for a few minutes we?re released onto the track for our 12 minute qualifying session. My strategy is to use the first two laps as a warm, lay down a couple of fast laps, cool off the tires for a lap or two then do a couple more hot laps. I?m mixed in with some of the fastest drivers and feel really comfortable that I wouldn?t be held up by slower traffic, at least at first, due to having 34 drivers jockeying for open track space. The grid is on the front stretch but start/finish is on the back straight ~1/2 lap from pit out. I rolled onto the track and immediately begin to warm up the tires as quickly as possible. I passed start/finish for the first time in 6th gear, dove through the 2nd gear 180 deg right hander turn 1 then blasted up to 5th gear towards the 1st gear 180 left hand hairpin turn two. Medium hard on the brakes, click down to 1st gear, roll
through the corner, smoothly back on the throttle for the? Oh no!!!? I’m slowly spinning counterclockwise due to being too hard on the throttle on the way out of the corner? I quickly floor the throttle to keep the engine from stalling and pull in the clutch? I’m able to keep the engine running? and miss hitting the barrier? Whew, that was close!!! But now I?m perpendicular to and facing the barriers with only a couple of feet of clearance between me and the barriers.
Hmmm? I don?t want to roll backwards into oncoming traffic and risk getting hit so I quickly decide to pop the clutch and lightly spin the kart to the right. Things went well right up until the point when? my left front tire hit the barriers which broke a rod end and bent the steering shaft and tie rods. My qualifying session is over before it started? I?m absolutely crushed & gutted? I quickly push the kart out of harm?s way to keep the track clear but keep my helmet on to give myself time to compose myself. I had such high hopes: my times were very competitive, I’ve raced, practiced, spent interminable hours prepping my kart, etc? for this qualifying session to set up what I was hoping for a run at the top ten here at the SuperNats. But now I?m done? Now I will have to start every heat from the very back and with the field so tight in lap times it?s going to be almost impossible now to make the main which is only 40 of the 68 drivers.

After the qualifying session was over and my kart and I trailered to the scale line, I was given the highest compliment of my karting life.
Jeff Littrell, who has won three SuperNats S4 championships and is a regular PKC racer and perennial fast guy, walked up to me and said the he was really scared of me during qualifying? and felt really bad for me. Thank you Jeff for the complement!!!

Friday Heat 1 (12 laps / Group C vs D / 5:50pm):
First, let me explain that the accumulation of points from the three heats dictates the grid for the 40 kart main (I?m in Group C for the three heats). Our first heat started early in the evening at 5:50pm with the sun already behind the Rio Hotel. With the time change and the hotel position, the sun sets right behind the hotel at ~4:00pm.
The track got dark quickly and changed a lot due to the lower ambient temperature so I made some chassis changes to compensate. I usually race with a dark smoke face shield but with the darkness I switched to my clear face shield. SKUSA rented a number of portable light stands with generators to provide enough illumination for night racing. The SuperNats is the only time I get to race at night. It?s surreal as you feel as if you?re almost in a tunnel and the speed and depth perception changes dramatically. Right after I put on my helmet the assistant race director called a quick drivers meeting at the front of the grid. He reminded us that we had three heats and to just take it a little easy so we can all make it through safely. We made our way back to our karts with many of us wishing each other luck. Of course, once the face shield goes down some of our wisdom leaves? (hee-hee).

I was dead last so it was easy to find my grid spot… We had 1-1/2 laps as a warm-up, did a couple of practice starts and pulled into our spots on the starting grid. After a few moments the grid was set, the lights came on, revs came up and “green, green, green!!!” off we went in a cloud of two stroke engine smoke. The starts can be challenging to get just right with the combination of engine revs and clutch slip.
The first couple of laps of any race are especially tricky; the tires aren’t fully up to temp and are a little bit slippery, there is an “accordion effect” as the karts are very close together, especially coming into a braking zone, drivers are jockeying for position swerving left & right trying to find a gap… Also, starting at the back, I?m more than a second a lap quicker than most of the drivers around me but? not only myself, but the other drivers are racing with a certain amount of desperation trying to make up positions & points to try and make the 40 kart main event.

Within the first five laps I made up 9 spots and worked my way up to 25th. Coming to start/finish I?m right on the bumper of the driver ahead of me, I had a great draft, coming to turn one I duck inside of the driver, am more than ½ way past him but he ?pinches? me into the barrier at the corner apex. This seriously bent my right tie rod & steering shaft ending my race? Argh!!! Doug is great by having all of the spare parts I needed, helped me to repair my steed and did the alignment.

Saturday Heat 2 (12 laps / Group A vs C / 3:05pm):

Sat warm-up

I switched the tires from the left side of the kart to the right as this helps with tire management and evens out tire wear and I?ve kept my clear face shield on as it?s almost dark due to heavy cloud cover.
About one hour before our heat some weather rolls in bringing cold temps, wind & spotty rain. Doug & I decide to wait out the weather to see if we need to change to rain tires. Luckily I have a very good karting friend, Bill Cox, who has lent me his karting rain gear the last two years (which I?ve never had to use / in fact I don?t think it?s ever rained at the SuperNats). Doug & I pack up the kart and kart stand with all the stuff we?ll need to make the switch. While we?re waiting on the pre-grid it begins raining harder and the race director calls the remainder of the day a ?rain race? meaning that we can choose to run as many rain tires as we like or use slicks. Doug & I both decide that it?s too wet to run slicks but not wet enough for a full wet setup so we quickly change the kart to a ?half way? wet setup. Keep in mind that there are many things that can be changed for a rain setup, not just changing to rain tires; long front hubs & wide front track, narrow rear hubs & track, remove seat struts, raise ride height, etc? are the major changes with many others possible. I?ve never raced in the rain(!!!) In fact, I sat out a PKC race earlier this year due to rain. So, needless to say I?m a little apprehensive.

I got a good start and immediately jumped to the outside for turn one.
I definitely didn?t want to be on the inside as I figured there would be a lot of carnage and I was right? I made up 11 spots to 23rd in one lap!!! The driver right next to me was on slicks, as he didn?t have rain tires, and waived be by after turn one. Drivers are spinning out everywhere? this is crazy? but fun at the same time!!! Half way through lap two I?m right behind a driver who slowly spins right in front of me, I try to take evasive action but end up spinning as well, we lightly touched each other and I stalled my kart ending my race.

Sat H2

You may notice in the video that I stay way to the outside of the turns as this is where the most grip is. The normal dry racing line has rubber build up which is slick as ice when it gets wet.

Doug is again ready with all of the spare parts to repair my kart and did the alignment? OK, I?ve now had both sides of my front end damaged & replaced so I?m hoping that?s the end of my racing bad luck.

Saturday Heat 3 (12 laps / Group B vs C / 5:35pm): sorry but no video?
My only goal is complete all 12 laps and make up as many spots as possible!!! I accomplish these goals and finish 23rd. Yeah!!!

Sunday LCQ (8 laps / 9:15am)

Before the LCQ we have a morning warm-up at 8:30am. All I was going to do was just make sure that nothing fell off the kart, or break, and not crash because there would be no time to fix it!!! OK, I’ve qualified to race in the Last Chance Qualifier (LCQ). This is the last chance to try and make it into the main. The top 34 out of 40 spots in the main have already been determined by points accumulation through the 3 heats. So that means that there are 34 drivers that are going to fight it out for the remaining 6 spots!!! Oh boy, and you thought the heats were crazy? wait until you try starting the LCQ from the back row!!! Even though I pretty much knew that it would take a miracle for me to make the main I still put on my second set of new race tires to give myself the best chance. My main goal was to just finish all eight laps, pass as many drivers as possible and have fun!!! Mission accomplished. I did have the 3rd quickest time, shy of only the 1st & 2nd place drivers.

Enjoy!!!
More Video LCQ SuperNationals

I would like to thank all those who helped me. While the actual racing on track is an individual sport, there are many people along the way that help to get you there (in no particular order):

SKUSA / Tom & Patti Kutscher – Allowing me to help behind the scenes and race!!!
Extreme Karting / Doug Sorenson – Great kart shop and fantastic service!!!
SwedeTech Racing Engines (Reine, Jason & Vince) – The best quality, service & support you could ever ask for!!!
Bill Cox – Lent me all of his karting rain gear (wheels, tires, hubs & rain suit)
Mike Goebel – Lent me his GoPro video camera

Cheers!!!

Ken Schilling
A clean kart is a happy kart, a happy kart is a fast kart!!!

2010 SuperNationals XIV and Pro Tour Championships

Saturday, November 20th, 2010

Las Vegas, NV – The SKUSA SuperNationals have come and gone, and another group of SwedeTech customers have added their name to the exclusive list of “SuperNationals Winner”. Derek Crockett (S2), Jimmy McNeil (S4), Daniel Langon (S5), and Joao Ricardo Queiroz Vieira (Tag Jr.) were all first time winners.

Alex Speed (S1) has been participating at the SuperNationals since 1998, with main event victories in 2000 (Jr. 80), 2001 (what was then called S1, is now the S2 class), and now in 2010 (S1).

Other SwedeTech customers did a fantastic job in the headline S1 class with Indy Dontje finishing third, Jason Toft in fourth, and Mike Beeney secured the fifth podium position.

With Derek Crockett sweeping qualifying, the heats and the main event, a few other SwedeTech drivers were driving hard to secure their place in the S2 record books. Cody Diede had a strong performance to finish third. Cameron Eggers was consistent all week long and came home with a well deserved fourth.

The S4 class had a bizarre series of events as the race had a few red flags due to heavy wind gusts moving the temporary course. At the end, SKUSA went Nascar style, and flew a green, white, checkered to end the main. Jimmy McNeil crossed the line first with an excellent performance by Eddie Olpin to finish second. Eduardo Pena rounded out the top five.

After the S5 qualifying session, Daniel Langon controlled the class from the front of the field. Langon almost pulled off a sweep of the class, but was spoiled by the second place finisher, Kiel Spaulding, who won one heat race after starting 30th.

The SuperNationals also served as the last leg of the 2010 SKUSA Pro Tour. After missing the first two rounds, Alex Speed had multiple wins to secure the runner up spot in the S1 Pro Tour Championship. STA teammate, Jason Toft, finished only five points away from a third place place.

Derek Crockett secured the S2 #1 plate after sweeping the SuperNationals and winning multiple events on the Pro Tour. Matt Alcorn finish second after a heartbreaking mechanical failure on the white flag lap at the SuperNationals. Cody Diede was consistent all year long, and earned the #4 plate.

By Dominating the S5 SuperNationals, Daniel Langon traveled back to NorCal with a SuperNationals victory and the Pro Tour #1 plate.

Eduardo Martins continues to show up at various big events in the G1 class. This year, he will add the #2 plate to his collection. And from Team Visalia, Darrell Tunnell will have the national #6 on his kart for 2011.

Team STA’s Jr. Tag driver, Austin Thomas, has been a regular at the Infineon karting center for a few years. This was the first time he would participate in a full national series. For his efforts, Austin earned the national #4.

Now that the SuperNationals and SKUSA Pro Tour are in the books, it is time to take a small breather and look forward to an exciting 2011 Season. For some winter reading, visit . This will give you an over view of the 14 year history of the SKUSA SuperNationals.

SwedeTech Hold Music Contest

Wednesday, November 10th, 2010

We at SwedeTech Racing are looking for ways to minimize to dead sound when customers are on hold. We strive to answer all phone calls when they come in, but there are just some days we can’t keep up. For those days, wouldn’t some good hold music be a nice addition?

The winner of the hold music will receive some of our new 2011 Swag.

When you listen to the file, go back to EKartingnews to cast your vote, or leave a comment on our site here.

Here is a easy link back to EKartingNews

Here are two samples submitted by a very talented SwedeTech Customer. Vote for your favorite

SwedetechTechno30sec

GalanteSwedetechMix30second

The files are about 5mb. May require a bit of download patience. Browser plug in QuickTime

SwedeTech Customers – the Two R’s, the Rock and Rotax

Friday, September 24th, 2010

Wilton, CA – The past few weeks have been filled with racing events with the letter R. The “RocK” Island Grand Prix and the NorCal “Rotax” Challenge. From tracks that require big horsepower to the Spec Rotax Series, SwedeTech Customers put their various machines on the top step.

Labor Day weekend has a huge tradition in Rock Island, IL, the one and only Rock Island Grand Prix. The winner of the event takes home the coveted Rock. This year’s headline event, The King of the Streets, was utilizing the Stock Honda CR125 package. With a couple of Rocks already sitting on his shelf, Kyle Wiegand was looking to add to his Rock Pile. Kyle drove his SwedeTech Powered Stock Honda to another King of the Streets title. Finishing a strong third place, Cole Mathewson made it through the main event to step on the last podium step.

In the ICC based KZ2 class, SwedeTech customers did a solid job representing the famous blue and yellow oval logo. SwedeTech power plants filled the top four spots at the hands of; Race Winner – Kyle Wiegand ( TM ), Second Place – Nick Johnson ( TM ), Third Place – Chris Shultz ( Maxter ), and Fourth Place – Carly Mandarino ( TM ).

The 125cc Masters class had a battle of engine packages. The European based ICC TM power plant vs. The Good Old American Based Modified CR125 beast. And yes, we know the Honda’s are built in Japan. But nothing beats the sound and rumble of a perfectly tuned Modified CR125. Chris Enderlein decided to go with a TM power plant, while Lance Lane was breathing down his neck with a Modified CR125. At the checkered flag, Chris would edge out Lance for the victory.

Amber Friedberg Masters the Reverse Tic Tac Toe section in Sonoma

Amber Friedberg Masters the Reverse Tic Tac Toe section in Sonoma

With three distinct Rotax dealers supporting the series, the Norcal Rotax Challenge has been a growing series for Rotax owners in Northern California. In the Senior International class, two SwedeTech customers keep finding themselves battling for the win. Amber Friedberg and Sean McDonald had a close finish at round 7, with Sean taking the win by a nose cone. Adding to her multiple podium finishes, Amber earned her first 2010 NorCal Rotax win at round 5. Matt Weiss has been consistent all year long, even after missing the last two events, he is sitting fourth overall for the 2010 season championship.

Annie Breidinger sits in first place for the MicroMax class in the NorCal series

Annie Breidinger sits in first place for the MicroMax class in the NorCal series

In the MicroMax division, the team consisting of sisters, Annie and Toni Breidinger, have finished first and second in the past 4 races.

Toni Breidinger sits in the runner up position for the MicroMax class in the NorCal series

Toni Breidinger sits in the runner up position for the MicroMax class in the NorCal series

With the championship secured, both of these young drivers are moving into the MiniMax division for the remainder of the year.
SwedeTech would like to thank all of our customers who continue to supply us with race results.
For more information, contact Jason at info@swedetechracing.com .
www.swedetechracing.com (technical site), or www.shopswedetech.com (official online store). SwedeTech Racing Engines offers parts and service for all two – stroke kart racing applications.

Photo Review for SwedeTech Racing Customers

Tuesday, August 24th, 2010

For this edition of SwedeTech’s customer results, we are making a photo album. Hope you enjoy the layout. We welcome all customers to submit their racing results.

SwedeTech 2010 May Review

Thursday, June 17th, 2010

April and May have been busy for SwedeTech customers throughout the country. Events such as the Region 11 IKF, SKUSA Mountain and Central States Series, ProKart North and South, and the CKI event in Phoenix have all taken place in a short amount of time.
Region 11 IKF action took place at the Prairie City Facility in early May. Kiel Spaulding headed out to this challenging facility and took control of the HPV 2 Jr. Class. For the day, Kiel was the mark as he qualified on pole, won the heat, and walked away with the win in the main event. Fellow competitor, David Vasquez, was on a loaner SwedeTech from a fellow racer, and had a good weekend as well. Qualifying 4th, Vasquez picked up one spot in the heat and for the main would finish with a solid second.

Austin Schimmel

Austin Schimmel


For the first round of the SKUSA Mountain Region, SwedeTech was trackside supporting the new regional series. The temporary layout of the track received great feedback from the competitors. Colorado has a strong pocket of S5 talent, which is the Jr. Stock Moto package that SKUSA has been promoting for a few years. Austin Schimmel put his SwedeTech powered Honda on pole to start the weekend. New to the S5 class, Eli Ziegler placed his machine in the fourth spot. In the first two heat races, Schimmel and another fellow competitor put on a fun show. Each driver claimed quick lap for each heat. At the end of the day, Austin would bring home a hard fought second. Eli was able to drive from the back to finish 4th in the main event.
Anthony Giannone entered the TaG Sr class powered by a Vortex Rok TT. Anthony had second wrapped up all weekend long, with a strong qualifying effort, two seconds in the heats, and a second place in the main event.
In the combined S1, S4, and G1 event, I have to place Mike McDonough in this press release (even though he is not on a SwedeTech). Mike runs the Masters Stock Moto class (S4) and he showed the young kids the way around the track and put his machine on pole. Cory Milne placed his SwedeTech Stock Moto in the 4th spot. In Heat 1, Milne race was cut short due to an on track incident. In Heat 2, Milne moved from the back of the pack to finish third. In the main, Milne grabbed the fastest lapped on his way to a solid 2nd place finish.
Shooting back over to the West Coast, the SKUSA ProKart North Series has had two events in the past month. For Round Three, Austin Keller was on hand running the TaG Jr class. Austin is having a good year in the TaG Jr field, and round three netted Austin an overall 4th place finish, with a second in the heat race. At a separate event, SwedeTech received word that Austin was involved in a karting crash that broke some bones, so we wish Austin a speedy recovery so he can represent SwedeTech at a race in the near future.
The ProKart North Series has a handful of good S1 drivers, and Round 3 was not an exception. For Qualifying, Nic Le Duc posted a quick time for the overall second spot. For the heat races, Nic grabbed a win and a second. For the main event, Le Duc laid down the fastest lap and after the checkered, was officially classified with a 3rd place finish. HPV 2 Jr was running again with the ProKart North series, and Daniel Langon was on a borrowed SwedeTech HPV from Shawn Thomas Racing. Daniel laid down a fast lap to grab the pole position. During the heats, Daniel had to drive hard grabbing two top five finishes. But when it counted Daniel Langon was able to put the borrowed HPV at the front of the field and came home with the win.
Round 4 of the ProKart North Series saw a new entry, but a very familiar name, entered in the S1 class. Alex Speed would make a return to the Honda package for this round of the ProKart North event. Alex didn’t miss a step, putting his SwedeTech Stock Moto on pole. Teammates Jason Toft and Nic Le Duc followed suit by qualifying third and fourth. In the Heat 1, Toft, Le Duc, and Speed would finish second, third and fourth. Heat 2, Speed would find his way back to the front for the heat win, and Toft would finish third. In the main, the field was stirred when Speed pulled his package off the track with a failed carburetor needle clip. With Alex watching the race, teammate Jason Toft put his package upfront for the main event win. Nic Le Duc would drive from the back to finish third.
In other Round 4 action, Austin Thomas placed his new My09 Leopard on pole. With two strong heat race finishes and setting the fastest lap, Austin was in a strong position all day. When the final checkered flew, Austin came home with a well deserved third place finish.

From regional racing to national events, SwedeTech was represented in Phoenix at the CKI event by Kiel Spaulding in Tag Jr and Raquel Martinez in the KF3 classes. Raquel had a superb weekend of racing in the KF3 class with her SwedeTech Vortex. Raquel almost pulled off a perfect sweep of the weekend, with the exception of a second place finish during a heat. Raquel would walk away from the event as the KF3 weekend champion.

Raquel Martinez

Raquel Martinez


In the other Jr class, Kiel Spaulding had his work cut out for him. Running in the top three all weekend long, Kiel put his SwedeTech Leopard machine at the front of the pack when it counted. Taking home both Main event victories for the weekend, Kiel would earn the TaG Jr weekend champion title.
Kiel Spaulding

Kiel Spaulding

SwedeTech Review – January – April 2010

Thursday, May 6th, 2010

The past few months have been busy for many of the SwedeTech customers with many events that had taken place throughout the country. SwedeTech always encourages our customers to share their results with us so we know who is racing and where.


The CKI Florida Cup wrapped up their series in Homestead, and Alex Speed wrapped up his three visits to Florida with the CKI Florida Cup KF2 Championship. Speed dominated the KF2 class with 8 wins, 1 runner up, and two Third place finishes putting the stamp on the 2010 CKI Florida Cup Championship.
The Rotax Gatorz Challenge of the Americas event made the final stop at Sonoma’s Infineon Raceway. In the Rotax Jr. Class, Kiel Spaulding put his package up front all weekend long. Spaulding was the benchmark for this event, as he swept both days by putting his SwedeTech Rotax on pole, won both heats, and won both main events.
With his performance, Kiel Spaulding secured the runner up spot in the Rotax Gatorz Challenge of the Americas Championship series.
The ProKart South Series held an event at Grange complex. Luke Bianco had a strong finish, winning the S4 Magnum class. In the S4 class, Rob Logan had a solid result by finishing third, and along the way, posted the fasted lap.
In the competitive S2 class, Cory Neveau drove his TonyKart machine to a third place finish. The G1 class is always fun to watch. Troy Butts finished a close third and posted some very quick lap times. Right behind him was Imran Husain.
In the middle of April, the SKUSA Pro Tour kicked off a new program. The first race was held at Infineon Raceway in Sonoma. For Saturday’s action, Nick LeDuc and Jason Toft qualified their S1 Stock Moto machines 2nd and 5th. As Saturday’s S1 main event rolled around, both LeDuc and Toft showed they had the speed to run up front. At the checkered, Jason Toft would finish second and Nic LeDuc finished fourth.
The S2 Stock Moto had a good turnout. SwedeTech customer, Alec Gumpfer, made the trip from Hawaii to participate in the ProTour event. His weekend started off good as he qualified third. In the first heat race, Gumpfer finished 3rd. During the second heat while running third, a chassis mechanical issue removed Alec from the race.
It has been a while since the entry lists at any event had the name Ray Zanotto on them. This weekend Ray decided to dust off the driving gear and support the ProTour at his local track, running the S4 class. In the second heat race, Zanotto finished 4h. At the end of the day, Ray Zanotto had a hard charge forward to finish a well deserved second.
The G1 class, with the ICC power plants had a solid group on the track. Eduardo Martins ( Maxter ) qualified second and Robert Marks ( TM ) posted the third quickest time. In the first heat race, Martins finished third, Marks finished fourth, and Jim Kidd ( Maxter ) moved his way through the pack to finish fifth. The second heat race had a lot of action as spots were shuffling during the whole race. Robert Marks finished the heat race in third, with Martins fourth, Imran Husain ( Maxter ) fifth and Jim Kidd sixth. In the main, Jim Kidd made a charge for the front and at the end of the day, finishes a hard earned 2nd place. Martins and Marks finish a close third and fourth, while Husain made the top five.
The S5 class is the building block for Stock Moto, as this group highlights the younger stock moto drivers. Austin Schimmel qualified third on the Infineon circuit. In the heat races, Schimmel was very consistent running in the lead pack. When Saturday’s final checkered waive, Schimmel earned a third place podium.
As Sunday would roll around, many teams made preparations to move up the charts. The headline S1 class would not disappoint in the main event. Starting from the back of the field, both Jason Toft and Nic LeDuc would put in two hard drives to move into the top five for the final result. The race was very exciting to watch. On the last lap, three different drivers could have one. When the checkered waived, Toft was third with LeDuc in fourth. A great run for both drivers.
S2 driver, Derek Crockett made the trip out from Illinois , for the first round of the SKUSA ProTour. Sunday was a good day for Crockett as he posted a strong second place finish in the main event.
G1 driver Robert Marks is a front runner seems to find himself in the right spots. For Sunday’s main event, Marks was in the right spot as a competitors engine expired, handing the win to Marks. Behind Marks, drivers were changing positions. Eduardo Martins would fend off the third place charger, and Jim Kidd would slot in for a fourth place finish.
The young S5 drivers put on a good show for their second main event of the weekend. It was close and exciting racing. Austin Schimmel was in the mix of the lead pack, as any three of the drivers could have pulled off the win. When the Jr S5’s received the waived checkered, Schimmel was running a very close third, solid results for the first round of the ProTour.
We apologize if anyone is every accidentally missed in the review. SwedeTech encourages our customers to email results to us so we can include you in our next monthly review.
For more information, contact Jason Berry at (916) 687 – 3980, www.swedetechracing.com (technical site), or www.shopswedetech.com (official online store). SwedeTech Racing Engines offers parts and service for all two – stroke kart racing applications.

Product Release – CR125 CDI Holder

Wednesday, April 28th, 2010

With the recent increase in Stock Moto participation, SwedeTech Racing has gone back to the drawing board to develop new products to help with the installation of the CR125 Stock Moto engine package for kart use.

SwedeTech Racing made the public release of the CDI holder at the first SKUSA Pro Tour event at Infineon.  This part is made from stainless steel and includes the hardware so you can easily mount the bracket to your CR125 engine.

Kit includes bracket, 3 aluminum spacers, and 3 bolts.

Direct link for more information – CDI Holder

The rubber CDI isolator is sold separately.

Photo compliments of Phastfoto Motorsports Photography

SwedeTech Spring Open House

Monday, April 5th, 2010

As many of you know, SwedeTech Racing moved to a new facility in the month of January 2010.  Many series started racing in January and February, which made it difficult to schedule a Grand Opening at the new shop.

Instead of opening our doors for only 1 day, SwedeTech is hosting an Open House event for the week of April 12 – April 15, 2010.  This is the week of the SKUSA Spring Nationals being held Infineon Raceway in Sonoma, CA.   SwedeTech felt this was a great time for our out of town customers to have a chance to see the new facility.

During this week, SwedeTech will maintain extended hours from Monday – Thursday.  Hours of operation during this week will be from 8am – 7pm.  We want to give our customers an ample opportunity to make it to the new facility.

During these days, Swedetech will have the BBQ cooking food from 11:30 am to 7 pm.  Sodas and water will also be provided.  We ask that you call the day before so we will have enough food and beverages on hand for everyone.

For more information, contact Jason Berry at (916) 687 – 3980, www.swedetechracing.com (technical site), or www.shopswedetech.com (official online store).  SwedeTech Racing Engines offers parts and service for all two – stroke kart racing applications.

SwedeTech Engine Sale and Parts Sale

Wednesday, March 3rd, 2010

Overstocked Engines equals big savings for Customers

In our attempts to keep our customer supplied, every once in a while we overstock our items.  Below is a list of engines and parts that we are selling at a discount to make room for the new 2010 inventory.

HPV Engine Package with pipe, carburetor, air box, and air filter.  Package includes a SwedeTech Blueprint and Dyno Break in — $2499.00 (retail 3245.00) – HPV 1, 2, 3, or 4 (Horstman Style Clutch) –  2 at this price.

Comer C50 Engines with carburetor, exhaust, and K&N air filter.  Includes SwedeTech Blueprint and Break In — $950.00 ( retail 1400.00 ) — 3 at this price.

IAME Parilla Leopards complete engine kits with carburetor, radiator, water pump, battery, and electrical.  2008 Key Style Leopard – Includes SwedeTech Blueprint and Dyno Break in.  $2950.00 (retail 3550.00) – 2 at this price.

All Comer Parts – K80 and C50 / C51 Parts — 25% off

All HPV Parts – 25% off

All ICC Parts – 15% off

Special pricing is only while supplies last.  No other discounts will be applied.